Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Post-Processing

Generate Volume Density Data from specific region

Mark Forums Read

Reply

Search this Thread

February 7, 2022, 03:14	Generate Volume Density Data from specific region	#1
Ahyar Member Muhammad Ahyar Join Date: Mar 2020 Posts: 30 Rep Power: 6	I tried to run the population balance equation tutorial simulation which located at Code: $FOAM_TUTORIALS/multiphase/multiphaseEulerFoam/RAS/bubblePipe in the post-processing directory, it generate the volumedensity data from injector region that defined using topoSet command. The volumeDensity data is generated using function object in controlDict. The function is probabilityDensity. This below is the controlDict file https://github.com/OpenFOAM/OpenFOAM...em/controlDict My question is, 1. How to use the probabilityDensity function in specific 3D region/point/area? 2. Should I use topoSet utility first to generate region? thanks in advance

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 17:22
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 18:57
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02
Warning 097-	AB	Siemens	6	November 15, 2004 04:41

All times are GMT -4. The time now is 00:33.