CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Post-Processing (http://www.cfd-online.com/Forums/openfoam-post-processing/)
-   -   wallHeatFlux sonicFoam (http://www.cfd-online.com/Forums/openfoam-post-processing/87470-wallheatflux-sonicfoam.html)

ishaninair April 20, 2011 20:10

wallHeatFlux sonicFoam
 
Hi,

I want to calculate heat transfer rate near the wall boundary for which I am using wallHeatFlux utility, but following error is displayed while running.

Create mesh for time = 0

Time = 0
Selecting thermodynamics package ePsiThermo<pureMixture<sutherlandTransport<specieT hermo<eConstThermo<perfectGas>>>>>


--> FOAM FATAL ERROR:
Not implemented

From function basicThermo::h()
in file basicThermo/basicThermo.C at line 259.

FOAM aborting

#0 Foam::error::printStack(Foam::Ostream&) in "/home/ishan/OpenFOAM/OpenFOAM-1.7.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/home/ishan/OpenFOAM/OpenFOAM-1.7.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Foam::basicThermo::h() in "/home/ishan/OpenFOAM/OpenFOAM-1.7.1/lib/linuxGccDPOpt/libbasicThermophysicalModels.so"
#3
in "/home/ishan/OpenFOAM/OpenFOAM-1.7.1/applications/bin/linuxGccDPOpt/wallHeatFluxRho"
#4 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#5
in "/home/ishan/OpenFOAM/OpenFOAM-1.7.1/applications/bin/linuxGccDPOpt/wallHeatFluxRho"
Aborted

Please Help.

JimKnopf May 27, 2011 04:05

You have to change the included Thermomodel in the code of wallHeatflux. In your case something like

#include "eConstThermo.H" - i think.

Then compile it and have fun.

Greetz
Jim


All times are GMT -4. The time now is 18:25.