CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Post-Processing (http://www.cfd-online.com/Forums/openfoam-post-processing/)
-   -   How to estimate roll, pitch, and yaw moments at once? (http://www.cfd-online.com/Forums/openfoam-post-processing/94640-how-estimate-roll-pitch-yaw-moments-once.html)

Geon-Hong November 21, 2011 23:50

How to estimate roll, pitch, and yaw moments at once?
 
Dear Foamers

I've worked with a 3D wing recently.

What I interested in is the change of the moments of the wing in three axes.

I applied the function of which came from the "libforces.so", however, the library seems to provide lift, drag and moment only.

Every time I estimate the moments, I run the execFlowFunctionObjects with 3 different moment directions.

Is there any library or ways to estimate the moments in different directions at once?

Thanks

Best regards,
Geon-Hong.


All times are GMT -4. The time now is 06:27.