CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Post-Processing (https://www.cfd-online.com/Forums/openfoam-post-processing/)
-   -   [paraFoam]More than six unsigned transforms detected? (https://www.cfd-online.com/Forums/openfoam-post-processing/98712-parafoam-more-than-six-unsigned-transforms-detected.html)

hsingtzu March 16, 2012 19:35

[paraFoam]More than six unsigned transforms detected?
 
Hello

My model had cyclic boundary conditions. checkMesh OK. I used icoFoam to solve it, and the courant number was always less than 1. However, when I was using paraFoam to view the result, I got the following error message.

Code:

--> FOAM FATAL ERROR:
More than six unsigned transforms detected:
6(((-1.26 0.207 1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.069 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 0.802 -1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.654 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.191 -1.26 0) (1 0 0 0 1 0 0 0 1) 0) ((-0.777 -1.26 0) (1 0 0 0 1 0 0 0 1) 0))

I had searched through the Internet, but I got no clue
I was wondering if anyone could kindly provide some suggestions
the package is available at http://dl.dropbox.com/u/20517550/cell3.zip

Thanks
Hsingtzu

Djub July 15, 2014 05:48

Hi M. Wu,

Did you solve your problem ? I have a similar problem using sHM (cf. this thread on cfd-online.com).
Thank you,


All times are GMT -4. The time now is 10:22.