CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Dynamic inlet boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 29, 2012, 00:04
Default Dynamic inlet boundary condition
  #1
New Member
 
Damien
Join Date: May 2012
Posts: 2
Rep Power: 0
Damien C is on a distinguished road
Hello,

How can i implement a time varying boundary condition ?

I looked for in the user guide and programmer guide of OpenFoam but i did'nt find anything.

Thanks for your help.

Damien
Damien C is offline   Reply With Quote

Old   May 29, 2012, 01:31
Default
  #2
Senior Member
 
Julien de Charentenay
Join Date: Jun 2009
Location: Australia
Posts: 229
Rep Power: 9
julien.decharentenay is on a distinguished road
Send a message via Skype™ to julien.decharentenay
You can look at an extension called groovyBC. It allows for time varying BC. I thought you might also be able to use a table, but have not done it myself.

Good luck. Julien
__________________
---
Julien de Charentenay
julien.decharentenay is offline   Reply With Quote

Old   May 29, 2012, 19:11
Default
  #3
New Member
 
Damien
Join Date: May 2012
Posts: 2
Rep Power: 0
Damien C is on a distinguished road
Thank you, i'm going to try it.
Damien C is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set up the inlet boundary condition for a low pressure case? beastieboys6 FLUENT 3 April 10, 2012 22:46
Velocity inlet boundary condition for porous medium Chander CFX 3 March 11, 2012 22:18
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 06:49
inlet and outlet boundary condition for turbomachinery solution siamak1424 OpenFOAM 2 August 15, 2009 11:14


All times are GMT -4. The time now is 20:56.