CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Minimum value BC? (http://www.cfd-online.com/Forums/openfoam-pre-processing/105836-minimum-value-bc.html)

Smed August 10, 2012 08:08

Minimum value BC?
 
Is it possible to set a Neumann type boundary conditions (zeroGradient), but constrain it to a minimum or maximum value? For example, I have a T-junction with one inlet and two outlets. I know the velocity of one outlet (10 ft/s), so I know that the inlet must be at least 10 ft/s, but could be greater if there is any flow out of the second outlet. How can I set the inlet velocity to have a minimum value of 10 ft/s?

Thanks.


All times are GMT -4. The time now is 18:29.