CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

manual decomposePar

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 11, 2012, 15:39
Default manual decomposePar
  #1
Member
 
Ganesh Vijayakumar
Join Date: Jan 2010
Posts: 44
Rep Power: 8
ganeshv is on a distinguished road
hi !

I have two meshes. I am running the simulations in mesh1. I now need to decompose mesh2 such that the bits of mesh2 and mesh1 overlap on each processor. Does anyone have a useful tool for this? Ideally I would like to label each cell on mesh2 with the appropriate processorID and then use decomposePar.

On a related note, is there an easy way to get the cellDist information on an already decomposed mesh? Say using funkySetFields or other?

ganesh
ganeshv is offline   Reply With Quote

Reply

Tags
celldist, decomposepar, manual

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar gives errors of_user_ OpenFOAM 1 July 4, 2011 05:27
decomposePar: can use this decomposition method only for the whole mesh aloeven OpenFOAM Bugs 0 March 16, 2011 11:15
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51
Can somebody send me a Fluent 6 UDF manual?? KKLAU FLUENT 4 April 14, 2004 16:37


All times are GMT -4. The time now is 02:30.