CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   BC for epsilon in NaganoTagawa k-epsilon model (http://www.cfd-online.com/Forums/openfoam-pre-processing/113273-bc-epsilon-naganotagawa-k-epsilon-model.html)

nikesh February 16, 2013 09:15

BC for epsilon in NaganoTagawa k-epsilon model
 
Hi all,
I am implementing Nagano-Tagawa's k-epsilon model in OpenFOAM.

As mentioned in this site :: http://www.cfd-online.com/Wiki/Low-Re_k-epsilon_models , i believe it requires us to set the boundary condition for epsilon at the wall which is usually set to 0 for Launder-Sharma's case.

Could anyone kindly explain how do I employ that boundary condition for epsilon at the wall in OpenFOAM???

Any help is highly appreciated.

Thanks
Nikesh.


All times are GMT -4. The time now is 15:29.