CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

BC for epsilon in NaganoTagawa k-epsilon model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 16, 2013, 09:15
Default BC for epsilon in NaganoTagawa k-epsilon model
  #1
Member
 
Nikesh Bhattarai
Join Date: Nov 2011
Location: Daejeon, South Korea
Posts: 69
Rep Power: 4
nikesh is an unknown quantity at this point
Hi all,
I am implementing Nagano-Tagawa's k-epsilon model in OpenFOAM.

As mentioned in this site :: http://www.cfd-online.com/Wiki/Low-Re_k-epsilon_models , i believe it requires us to set the boundary condition for epsilon at the wall which is usually set to 0 for Launder-Sharma's case.

Could anyone kindly explain how do I employ that boundary condition for epsilon at the wall in OpenFOAM???

Any help is highly appreciated.

Thanks
Nikesh.
nikesh is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
groovyBC issue - k and epsilon sagnikmazumdar OpenFOAM Running, Solving & CFD 24 March 1, 2015 08:16
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 17:44
Calculation of k and epsilon freezes Nigirim OpenFOAM Running, Solving & CFD 1 November 14, 2012 08:52
k and epsilon discretization of RNG model mehran NUMECA 0 January 24, 2009 01:01
SimpleFoam k and epsilon bounded nedved OpenFOAM Running, Solving & CFD 1 November 25, 2008 21:21


All times are GMT -4. The time now is 13:32.