CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   setFields or funkySetFields with STL file? (http://www.cfd-online.com/Forums/openfoam-pre-processing/113521-setfields-funkysetfields-stl-file.html)

vinz February 21, 2013 05:52

setFields or funkySetFields with STL file?
 
Dear all,

Is it possible to use an STL file in order to assign some value to the pressure field for example for points which are inside one closed shape described by an STL file?
If yes, how should I proceed?

Thanks

gschaider February 21, 2013 12:29

Quote:

Originally Posted by vinz (Post 409264)
Dear all,

Is it possible to use an STL file in order to assign some value to the pressure field for example for points which are inside one closed shape described by an STL file?
If yes, how should I proceed?

Thanks

I'm afraid not. In Libraries/functionPlugins/swakSurfacesAndSetsFunctionPlugin there is a number of plugin-functions for surfaces (finding whether a surface touches a cell etc) but not the one you need.

It is somewhere on my "cool things that I implement once I need them"-list


All times are GMT -4. The time now is 09:42.