CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Mesh export to OpenFOAM issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 2, 2013, 11:42
Default Mesh export to OpenFOAM issue
  #1
Senior Member
 
starter
Join Date: Sep 2012
Posts: 125
Rep Power: 15
sihaqqi is on a distinguished road
Hi All

When I convert my fluent.msh file to OpenFOAM using fluent3DMeshtoFoam, files are generated succesfully in polyMesh withut any errors but my geometry in paraFoam completely changes. File 1 shows two pipes connected by a 90degree mitre drawn half in symmetry in Ansys and file 2 shows geometry in openFoam which is only a rectangle. Can anyone advise.

Many thanks

Regards
Attached Images
File Type: jpg file 1.jpg (91.4 KB, 5 views)
File Type: jpg file 2.jpg (62.6 KB, 7 views)
sihaqqi is offline   Reply With Quote

Old   March 2, 2013, 15:07
Default
  #2
Senior Member
 
Join Date: Jan 2010
Location: Stuttgart
Posts: 150
Rep Power: 16
Chrisi1984 is on a distinguished road
Hi,

I think you just activated "outline" in Paraview. Swith that button to "surface"

then you will see your real geometry that should look as it does in ANSYS.

Regards

Chrisi
Chrisi1984 is offline   Reply With Quote

Old   March 2, 2013, 23:14
Default
  #3
Senior Member
 
starter
Join Date: Sep 2012
Posts: 125
Rep Power: 15
sihaqqi is on a distinguished road
Thanks Chrisi. Problem solved. This is what happens when you are a beginner.

Regards
sihaqqi is offline   Reply With Quote

Reply

Tags
geometry import, mesh export issues

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] vtk mesh or Abaqus mesh to OpenFOAM bigphil OpenFOAM Meshing & Mesh Conversion 27 November 23, 2015 18:31
[Commercial meshers] .CCM to OpenFoam mesh issue otq OpenFOAM Meshing & Mesh Conversion 6 January 8, 2013 11:57
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Export 2D mesh from ICEM to Fluent BuilttoSpill ANSYS Meshing & Geometry 4 August 28, 2010 09:16
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 09:41.