starccm to foam data conversion error
I am facing some issues while converting data from starccm to openfoam format.I went through the openfoam wiki page and tried the steps given there but still getting the same error. Is there a solution for this, I need a answer on a urgent basis.
That's... a very vague description :(
A few questions:
Ok, sorry for the previous query, I get an error which reads as follows :
* The license of the libccmio library is proprietary:
Users wishing to make use of its functionality should contact CD-Adapco
* This script will install the libccmio library
* After obtaining the libccmio-2.6.1 library, place in folder
+ [ -e /home/rahul/OpenFOAM/ThirdParty-2.1.1/platforms/linuxGccDPOpt/lib/libccmio.so ]
I use OpenFOAM 2.1.1
Instead of Star-ccm, why don't you try from Star-cd to openfoam?
I will advice you to save your case in star-cd format and then go for the conversion to openfoam.
As per my knowledge, mesh conversion from star-cd to openfoam is available.
For more information visit the following link:
Greetings to all!
@RAUL: if you're still trying to build ccm26ToFoam, check this thread: http://www.cfd-online.com/Forums/ope...m26tofoam.html
|All times are GMT -4. The time now is 03:14.|