[RAUL]

Hi,
I am facing some issues while converting data from starccm to openfoam format.I went through the openfoam wiki page and tried the steps given there but still getting the same error. Is there a solution for this, I need a answer on a urgent basis.

[wyldckat]

Greetings RAUL,
That's... a very vague description
A few questions:

• What error are you getting?
• What exactly are you trying to do?

Best regards,
Bruno

[RAUL]

Ok, sorry for the previous query, I get an error which reads as follows :

rahul@rahul-desktop:~/OpenFOAM/OpenFOAM-2.1.1$ $FOAM_APP/utilities/mesh/conversion/Optional/Allwmake
+ /home/rahul/OpenFOAM/ThirdParty-2.1.1/AllwmakeLibccmio

* The license of the libccmio library is proprietary:

Users wishing to make use of its functionality should contact CD-Adapco
for possible download and terms of use.


Usage: AllwmakeLibccmio

* This script will install the libccmio library
* After obtaining the libccmio-2.6.1 library, place in folder

/home/rahul/OpenFOAM/ThirdParty-2.1.1/libccmio-2.6.1/

+ [ -e /home/rahul/OpenFOAM/ThirdParty-2.1.1/platforms/linuxGccDPOpt/lib/libccmio.so ]

[RAUL]

I use OpenFOAM 2.1.1

[Tushar@cfd]

@Raul

---------------------------------

Instead of Star-ccm, why don't you try from Star-cd to openfoam?

I will advice you to save your case in star-cd format and then go for the conversion to openfoam.

As per my knowledge, mesh conversion from star-cd to openfoam is available.

For more information visit the following link:
http://http://www.openfoam.org/docs/...conversion.php

[wyldckat]

Greetings to all!

@RAUL: if you're still trying to build ccm26ToFoam, check this thread: http://www.cfd-online.com/Forums/ope...m26tofoam.html

Best regards,
Bruno