CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Using setFieldDict for a wedge......

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 24, 2013, 23:18
Default Using setFieldDict for a wedge......
  #1
New Member
 
Vishal
Join Date: Feb 2013
Posts: 20
Rep Power: 4
vishal3 is on a distinguished road
HI
I want to use setFieldDict for a wedge of a cylinder(D=0.138; H=1.38).
I have 5 degree wadge.
Can anyone suggest something?
vishal3 is offline   Reply With Quote

Old   July 26, 2013, 12:38
Default
  #2
Senior Member
 
Nima Sam
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,123
Blog Entries: 1
Rep Power: 14
nimasam is on a distinguished road
Send a message via Yahoo to nimasam
whats the problem of using setFieldDict? could describe more precisely your problem
__________________
Training Course on OpenFOAM at (http://www.isme.ir/)
My Weblog (http://openfoam.blogfa.com/)
nimasam is offline   Reply With Quote

Old   July 28, 2013, 23:57
Default
  #3
New Member
 
Vishal
Join Date: Feb 2013
Posts: 20
Rep Power: 4
vishal3 is on a distinguished road
Thank you for your reply Nima Sam.

I wanted to simulate 2D axisymmetric bubble column of the dimensions above mentioned.
For this case I have chosen a wedge of 5 degrees. My column height is 1.38 m (as mentioned earlier) and the liquid height in the column is 0.9 m. In order to specify the liquid and gas heights separately I need to use this setFieldDict. I mention these gas and liquid heights in the column by defining phase fractions.

For an example I am attaching setFieldDict file, which I have used for 3D simulations of same column.
Attached Files
File Type: txt setFieldsDict.txt (1.1 KB, 5 views)
vishal3 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems in creating a wedge type mesh Joscha OpenFOAM Native Meshers: blockMesh 22 May 14, 2015 05:10
Axisymmetric Whirl BCs; Wedge or Cyclic? c_dowd OpenFOAM Pre-Processing 4 December 5, 2012 11:38
Wedge and morpher Henry Arrigo STAR-CCM+ 5 July 6, 2012 18:34
axisymmetric wedge case problem comedy_tigers88 OpenFOAM Running, Solving & CFD 0 June 16, 2012 04:45
Wall boundary is ignored when using wedge Wedge OpenFOAM 1 February 7, 2011 07:20


All times are GMT -4. The time now is 09:12.