CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

boundary condition : subject name not same

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 16, 2013, 06:20
Default boundary condition : subject name not same
  #1
Member
 
Join Date: Aug 2013
Posts: 50
Rep Power: 3
nash is on a distinguished road
hi everyone,

I'm now investigating a radial flow fan simulation using simpleFoam.
Everything went well including the result from the simulation.

unfortunately when i convert the mesh (from sHM) using ANSA there is error stating that

[CODE][Warning: Expected object 'omega' found 'epsilon'/CODE]

i check the folder 0 for omega i found out that the subject is epsilon and not omega.

Code:
FoamFile
{
    version     2.0;
    format      ascii;
    class       volScalarField;
    object      epsilon;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //


dimensions      [0 0 -1 0 0 0 0];

internalField   uniform 1.78;
the dimension is already correct for omega.

my Question is, whether the subject name affects my simulation?
since the simulation is taking lots of time.

thank you in advance

-nash-
nash is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation interface hinca CFX 15 January 26, 2014 18:11
Error finding variable "THERMX" sunilpatil CFX 8 April 26, 2013 07:00
Domain Imbalance HMR CFX 3 March 6, 2011 21:10
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06
The Boundary Condition about the Flat Plate boing Main CFD Forum 1 January 6, 2002 17:53


All times are GMT -4. The time now is 02:46.