CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Running OpenFOAM in parallel by enabling distributed in decomposeParDict (http://www.cfd-online.com/Forums/openfoam-pre-processing/124075-running-openfoam-parallel-enabling-distributed-decomposepardict.html)

summer September 26, 2013 16:31

Running OpenFOAM in parallel by enabling distributed in decomposeParDict
 
Hi,

Has anyone ever tried to run OpenFOAM in parallel with different locations for each process following the instructions below:

http://www.cfd-online.com/Forums/blo...h-process.html

I tried it but got an error

[4] --> FOAM FATAL ERROR:
[4] simpleFoam: cannot open root directory "nodename"
[4]
[4]
FOAM parallel run exiting
[4]
[1]
[1] --> FOAM FATAL ERROR:
[1] simpleFoam: cannot open root directory "nodename"
[1]
[1]
FOAM parallel run exiting
[1]
[2] --> FOAM FATAL ERROR:
[2] simpleFoam: cannot open root directory "nodename"
[2]
...

Or dose anyone succeed in setting up the decomposeParDict with "Distributed yes"? Thanks!


All times are GMT -4. The time now is 22:14.