CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Boundary conditions for the group of patches

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 5, 2013, 15:31
Default Boundary conditions for the group of patches
  #1
Member
 
Roman
Join Date: Sep 2013
Posts: 37
Rep Power: 3
Roman1 is on a distinguished road
Hello everybody. Please help with resolving next problem. I use a OF case that includes very many different geometry objects, mostly boxes. Writing boundary conditions for each of them takes much time and much "paper". They all have the equal BC. Is there a method of assigning one and the same BC to a group of patches or walls (to a list of patches or to all together) ? Thanks.
Roman1 is offline   Reply With Quote

Old   November 5, 2013, 17:01
Default
  #2
ngj
Senior Member
 
Niels Gjoel Jacobsen
Join Date: Mar 2009
Location: Deltares, Delft, The Netherlands
Posts: 1,619
Rep Power: 25
ngj will become famous soon enoughngj will become famous soon enough
Good evening Roman,

You want to look into the use of regular expression for the naming of the boundaries. A good example for this is the motorBike tutorial, which you can find here (for OF2.2.0):

OpenFOAM-2.2.0/tutorials/incompressible/simpleFoam/motorBike

Good luck,

Niels
__________________
Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.
ngj is offline   Reply With Quote

Old   November 6, 2013, 03:07
Default
  #3
Member
 
Roman
Join Date: Sep 2013
Posts: 37
Rep Power: 3
Roman1 is on a distinguished road
NGJ, thanks and best regards.
Roman1 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
non reflective boundary conditions for incompresible flow Pascal_doran OpenFOAM Programming & Development 16 August 25, 2015 05:35
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
inlet boundary conditions newOFuser OpenFOAM 1 January 10, 2013 09:08
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
BFC for Dam break problem Mehdi BEN ELHADJ Phoenics 0 January 18, 2001 16:22


All times are GMT -4. The time now is 14:22.