Dents in mesh with addLayers -- CFD Online Discussion Forums

November 22, 2013, 01:38

Dents in mesh with addLayers

nisha

New Member

Nisha

Join Date: Sep 2009

Location: Massachusetts

Posts: 18

Rep Power: 16

I am using openfoam 2.2.x for creating mesh using snappy tool.

When attempting to create layers around a square part which is located inside a duct, I see some dents / missing elements in the mesh along the edges of the duct.

The dents are seen only when addLayers is used as there are not dents after the snapping step (i.e., the mesh in '2' folder has no dents but mesh in '3' folder has dents - see attached pictures).

Any ideas ? Please help. Thanks.

Nisha

Attached Images

	2-mesh.jpg (99.4 KB, 20 views)
	3-mesh.jpg (99.5 KB, 33 views)

Tags

addlayers, missing cells, snappyhexmesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface	Kryo	OpenFOAM Meshing & Mesh Conversion	13	February 17, 2022 07:34
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
Converting Starccm+ mesh	Ladnam	OpenFOAM	0	September 14, 2011 06:30
[snappyHexMesh] Mesh becoming coarser during addLayers in sHM	Arnoldinho	OpenFOAM Meshing & Mesh Conversion	4	April 6, 2011 12:20
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21

All times are GMT -4. The time now is 23:22.