CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

heat exchanger with porous media

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 9, 2013, 08:26
Default heat exchanger with porous media
  #1
New Member
 
ande
Join Date: Oct 2013
Posts: 18
Rep Power: 3
styx is on a distinguished road
hi,

I wand to simulate the heat exchange between a porous zone and air. the hot porous zone should heat up the air. The flow channel can be seen in the picture.

How can I define the heat transfer between the porous zone and the air? I want to use the chtMultiRegionSimpleFoam solver. The porous zone is defined in the fvOptions dictionary. But how can I define the heat transfer between air and the porous zone?

Zeichnung.jpg
styx is offline   Reply With Quote

Reply

Tags
chtmultiregionsimplefoam, heat exchange, porous

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
REG POROUS MEDIA HEAT TRANSFER Rashmi Venkat FLUENT 6 June 1, 2006 05:13
Porous Media with heat transfer A.S. CD-adapco 2 February 23, 2005 04:01
Porous Media With Heat Transfer A.S. Main CFD Forum 1 January 10, 2005 04:56
porous media: Fluent or Star-CD? Igor Main CFD Forum 0 December 5, 2002 16:16
Heat transfer in porous media Sri FLUENT 0 January 16, 2002 23:54


All times are GMT -4. The time now is 01:26.