CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (https://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   LocationInMesh errors (https://www.cfd-online.com/Forums/openfoam-pre-processing/129078-locationinmesh-errors.html)

Dadou January 28, 2014 06:24
LocationInMesh errors
 
2 Attachment(s)
Dear Foamers,

I am using OpenFOAM tto model a simple geometry. I used Salome for pre-processing and created the .stl files.

I'm trying to run the sHM but the same error keeps popping up : Point (14.2357 11.2357 3.23569) is not inside the mesh or on a face or edge.
Bounding box of the mesh: (0 0 0) (3.5 2.2 1.1)


I tried to read some posts on CFD Online but didn't really helped me. Does anyone knows how to solve this problem ?

BTW : here's my blockMehs and sHM

Thank you

Dadou

nimasam January 29, 2014 06:06
well, it is obvious
Quote:
I'm trying to run the sHM but the same error keeps popping up : Point (14.2357 11.2357 3.23569) is not inside the mesh or on a face or edge.
Bounding box of the mesh: (0 0 0) (3.5 2.2 1.1)
look the point position carefully, you will find out that its out of domain

Dadou January 29, 2014 06:18
Quote:
Originally Posted by nimasam (Post 472314)
well, it is obvious

look the point position carefully, you will find out that its out of domain
That wasn't the problem actually, it was my blockMeshDict.
I finally fixed it

Thx


All times are GMT -4. The time now is 06:50.