Open multiple stl files via snappyHexMesh utility

bineet_aero · July 16, 2014, 03:08

Is it possible to import two different stl files in snappyHexMeshDict and mesh them. I want to mesh a cylinder and an airfoil. The aim is to use AMI between these two mesh interfaces and make the airfoil move.

Please let me know any other way also.

bineet_aero · July 16, 2014, 03:17

i have stl file with both of the geometries included. Will it be possible for me to use snappyHexMesh to mesh them such that cylinder remains fixed while the airfoil moves. I guess it won't because the two geometries are the part of same stl.. Please correct me

July 16, 2014, 03:08	Open multiple stl files via snappyHexMesh utility	#1
bineet_aero Member Bineet Mehra Join Date: Aug 2013 Posts: 61 Rep Power: 12	Is it possible to import two different stl files in snappyHexMeshDict and mesh them. I want to mesh a cylinder and an airfoil. The aim is to use AMI between these two mesh interfaces and make the airfoil move. Please let me know any other way also.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
Trouble compiling utilities using source-built OpenFOAM	Artur	OpenFOAM Programming & Development	14	October 29, 2013 10:59
How to generate STL files for idealized geometries?	werder85	Main CFD Forum	0	November 1, 2012 12:47
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry	villier	OpenFOAM Meshing & Mesh Conversion	17	June 15, 2010 19:51
Problems in compiling paraview in Suse 10.3 platform	chiven	OpenFOAM Installation	3	December 1, 2009 07:21

July 16, 2014, 03:17		#2
bineet_aero Member Bineet Mehra Join Date: Aug 2013 Posts: 61 Rep Power: 12	i have stl file with both of the geometries included. Will it be possible for me to use snappyHexMesh to mesh them such that cylinder remains fixed while the airfoil moves. I guess it won't because the two geometries are the part of same stl.. Please correct me