CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

output for snapping process

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 21, 2014, 05:37
Default output for snapping process
  #1
Senior Member
 
M. C.
Join Date: May 2013
Location: Italy
Posts: 122
Rep Power: 5
student666 is on a distinguished road
Hi all,

I would like to know if there's a chance to have the scaling iteration of the smoothing process as output into csv format or formatted txt.

thank you for supporting.

Regards

Quote:
Smoothing iteration 3
Found 0 non-mainfold point(s).

Scaling iteration 0
Moving mesh using displacement scaling : min:1 max:1
Checking faces in error :
non-orthogonality > 45 degrees : 326
faces with face pyramid volume < 1e-13 : 0
faces with face-decomposition tet quality < 1e-09 : 0
faces with concavity > 70 degrees : 1
faces with skewness > 2 (internal) or 15 (boundary) : 0
faces with interpolation weights (0..1) < 0.02 : 0
faces with volume ratio of neighbour cells < 0.01 : 0
faces with face twist < 0.02 : 0
faces on cells with determinant < 0.001 : 0

Scaling iteration 1
Moving mesh using displacement scaling : min:0.75 max:1
Checking faces in error :
non-orthogonality > 45 degrees : 229
faces with face pyramid volume < 1e-13 : 0
faces with face-decomposition tet quality < 1e-09 : 0
faces with concavity > 70 degrees : 1
faces with skewness > 2 (internal) or 15 (boundary) : 0
faces with interpolation weights (0..1) < 0.02 : 0
faces with volume ratio of neighbour cells < 0.01 : 0
faces with face twist < 0.02 : 0
faces on cells with determinant < 0.001 : 0

Scaling iteration 2
Moving mesh using displacement scaling : min:0.5625 max:1
Checking faces in error :
non-orthogonality > 45 degrees : 102
faces with face pyramid volume < 1e-13 : 0
student666 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
outputTime in Swak function immortality OpenFOAM Post-Processing 16 February 14, 2016 17:02
writing execFlowFunctionObjects immortality OpenFOAM Post-Processing 30 September 15, 2013 06:16
RNG diverged during the analysis the flow over a multi element airfoil, why? s.m OpenFOAM Running, Solving & CFD 0 August 5, 2013 08:39
HTC variation output in quenching process mechanical AVL FIRE 2 September 14, 2012 11:21
How to output the process of the calculation ivanyao OpenFOAM Running, Solving & CFD 10 March 2, 2009 06:46


All times are GMT -4. The time now is 12:04.