CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

how to generate conical geometry in topoSet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 7, 2015, 09:54
Default how to generate conical geometry in topoSet
  #1
New Member
 
Peng Liang
Join Date: Mar 2014
Posts: 27
Rep Power: 3
tjliang is on a distinguished road
Hello Foamers,

i am recently struggling with the mesh problems. I want to use toposetdict to generate a cathode, which is built with a cylinder and a cone . I have searched out the document inhttps://openfoamwiki.net/index.php/TopoSet, from which I can only find how to generate cylinder using cylinderToCell. Now I wonder if a cone shaped geometry is also possible using toposet.Any hints from you will be welcome. Thanks in advance.

Peng
tjliang is offline   Reply With Quote

Old   January 20, 2015, 12:15
Default
  #2
Senior Member
 
Join Date: Mar 2010
Location: Germany
Posts: 139
Rep Power: 7
cutter is on a distinguished road
Hi,

as far as I know that's currently not possible. I might be wrong though.

The required functionality (coneToCell) can be implemented based on the cylinderToCell cell source with little effort. The code is located at .../src/meshTools/sets/cellSources/cylinderToCell.

Hope that helps.

Cutter
cutter is offline   Reply With Quote

Old   January 20, 2015, 13:43
Default
  #3
Senior Member
 
Matthew Denno
Join Date: Feb 2010
Posts: 138
Rep Power: 8
mgdenno is on a distinguished road
Another thought - It seems like something swak4foam could do, although I have never tried.

If I search for "swak4foam swakTopoSource", this thread comes up. Looks like it may send you in the right direction as far as using swak4foam in the topoSetDict file.

topoSet - swakTopoSources - expressionToFace - problem regarding "variables"
mgdenno is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Generate multiply bodies and then mesh them one by one hz283 ANSYS Meshing & Geometry 1 March 3, 2013 16:27
[DesignModeler] problem with import geometry from catia pavilion ANSYS Meshing & Geometry 1 November 23, 2012 11:45
[ICEM] how to generate high quality mesh with this geometry? llrr ANSYS Meshing & Geometry 6 November 23, 2012 06:40
vitual _ real deneb FLUENT 3 January 22, 2007 05:31
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 03:53.