CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Particles again in geometry after the outlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 7, 2015, 10:59
Default Particles again in geometry after the outlet
  #1
Member
 
Evangelos
Join Date: Sep 2011
Posts: 70
Rep Power: 6
Danath is on a distinguished road
Hello

I want to ''reuse'' only the particles that leaving from a geometry again (from outlet to inlet again) in order to keep the concentration steady.

The only thing that i can imagine is to use cyclic boundary conditions. Is there any other way ?
Danath is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fan geometry for simulation with inlet and outlet duct chaudhry_hashim STAR-CCM+ 0 July 2, 2014 02:52
Conditional Release of DPM particles - UDF nvschandra Fluent UDF and Scheme Programming 0 December 10, 2013 12:02
Coal particles at outlet bharath CFX 0 April 7, 2011 21:47
Problem meshing an imported geometry Alicia Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 March 30, 2010 04:53
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 07:01.