CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   New Solver (http://www.cfd-online.com/Forums/openfoam-pre-processing/61997-new-solver.html)

Chalothon Thumthae (Thumthae) February 5, 2004 07:29

Hello, How can I link a ne
 
Hello,

How can I link a new solver to FoamX case manager, for example dieselEngineFoam or if I edit a new solver. For now, when I create a new case, the solver dieselEngineFoam is absent.

Thank

Torn

Chris Greenshields (Chris) February 5, 2004 09:03

The configuration files for F
 
The configuration files for FoamX are in the $FOAMX_SYSTEM_CONFIG directory. They can be modified or added to. (In fact you can put personal changes in a directory $FOAMX_USER_CONFIG to avoid losing them during an upgrade of FOAM; $FOAMX_USER_CONFIG should have the same directory hierarchy as $FOAMX_SYSTEM_CONFIG)

dieselEngineFoam is the only solver that does not currently have a tutorial case or FoamX configuration associated with it (because it is very new). We will endeavour to supply a case and configuration in the next release of FOAM.

borisd October 28, 2005 05:27

Hi, Where can I find the $FOA
 
Hi,
Where can I find the $FOAM_SYSTEM_CONFIG directory? I have copy the FoamX file from the engineFoamsolver and now the dieselEngineFoam solver is listed in the FoamXCaseBrowser. It is able to open a case under dieselEngineFoam but how can I ceate the directories with spraymodel- or injector settings?
I need help.
Thank you
Boris

borisd October 28, 2005 05:32

Sorry, I would say dictionari
 
Sorry,
I would say dictionaries (like turbulencProperties) and not directories.

mss November 27, 2006 07:23

Hej, I have problems with a
 
Hej,

I have problems with adding a user application class.
When typing "echo $FOAM_USER_CONFIG" I just receive a empty line as
answer....?
Could anyone help me with this problem?

thank you,
Rita

mahaputra February 8, 2009 19:50

Dear All i successed to
 
Dear All



i successed to make a new solver by using twoPhaseEulerFoam base solver. i called it as my_twoPhaseEulerFoam.

i put Temperature on it and i successed use it manually to simulate tutorial cases with Temperature on bed, bed2 and bubblecolumn without error message.

and i also try to put this new solver in FoamX. and success, it is shown in the solvers list.

but the problem is:

the Temperature ''feature'' that i put on the new solver doesnt show on the new case window that i made on FoamX. so i dont find Temperature column on the Fields list , for filling the Temperature boundary condition value (also in the Patch option)


is there anyone knows how to solve my problem?

please help me.



Regards


Nugroho Adi


All times are GMT -4. The time now is 17:51.