CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Falling Droplet Boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 20, 2008, 13:33
Default I'm struggling with some bound
  #1
Member
 
Eelco Gehring
Join Date: Mar 2009
Posts: 70
Rep Power: 8
feijooos is on a distinguished road
I'm struggling with some boundary conditions.I'm using interFoam to solve a droplet splashing into a pool of water. You can find the geometry of my problem here: http://www.feijo.nl/outline.png

With funkySetFields I created a droplet in the top of the middle column. Right now, the droplet won't go past that little patch where the middle column meets the lower block, where the liquid pool is. I specified the top of that block and the little patch where both surfaces meet as the an atmosphere path. That doesn't seem to work though. Can anyone help me out? thanks
feijooos is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
droplet falling - VOF bohis FLUENT 1 July 10, 2013 04:28
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
Droplet boundary layer Neser25 CFX 1 March 14, 2007 13:49
Boundary Condition for single droplet evaporation Deepak Kumar Mandal CD-adapco 0 January 30, 2007 10:25
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 07:18


All times are GMT -4. The time now is 02:29.