CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

FoamXException by change in controlDict

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 12, 2007, 06:30
Default Hi, After mapFields from ca
  #1
New Member
 
Vladimir Rosic
Join Date: Mar 2009
Location: Vienna, Austria
Posts: 2
Rep Power: 0
vladimir is on a distinguished road
Hi,

After mapFields from cavity to cavityFine I can not
change the times in controlDict.

There is the FoamXException:

"Number 0.5 not of correct type" (startTime)

at FoamX.Editors.DictionaryEntryEditor.EntryCache.
ScalarCache.updateValue(ScalarCache.java:172)

Should I show there ?
Thank You for help.
vladimir is offline   Reply With Quote

Old   March 12, 2007, 06:36
Default Search the forum. Then, set y
  #2
Senior Member
 
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,758
Rep Power: 21
hjasak will become famous soon enough
Search the forum. Then, set your locale to english - OpenFOAM does not like commas in number definition.

Hrv
__________________
Hrvoje Jasak
Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk
hjasak is offline   Reply With Quote

Old   March 14, 2007, 15:32
Default The explanation is in "Install
  #3
New Member
 
Vladimir Rosic
Join Date: Mar 2009
Location: Vienna, Austria
Posts: 2
Rep Power: 0
vladimir is on a distinguished road
The explanation is in "Installation" and I had searched in "Preprocessing/FoamX".

Thank you Hrvoje
vladimir is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Specifying probe locations in controlDict using dictionary file vincent OpenFOAM Bugs 3 December 31, 2008 05:25
ControlDict for snappyHexMesh adn interFoam erik023 OpenFOAM Running, Solving & CFD 3 November 10, 2008 19:27
Reading controlDict diegon OpenFOAM Running, Solving & CFD 1 February 6, 2007 13:31
Should I change to CFX ? Raul FLUENT 1 October 15, 2006 13:58
change the Junyan FLUENT 0 July 2, 2002 02:46


All times are GMT -4. The time now is 13:31.