CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   How to generate OpenFOAM grid from DEM data (http://www.cfd-online.com/Forums/openfoam-pre-processing/62194-how-generate-openfoam-grid-dem-data.html)

rcpoudel May 22, 2006 13:34

Hey everybody, I am stuck o
 
Hey everybody,

I am stuck on how to generate grid readable to OpenFOAM from from my GIS based DEM (digital elevation model) data. It consist of XYZ point file (1000 x 1000 points).

Here my objective is to Analyse the flow over a terrain usning RANS or LES.

Any suggestion will be highly appriciated,

Regards

mattijs May 22, 2006 13:41

Generate a 999x999 grid with t
 
Generate a 999x999 grid with the correct upper boundary. Find out what the point numbering is for the lowest layer of points.

Hack the movePoints application to move the points to the correct position while morphing the internal points.


All times are GMT -4. The time now is 02:10.