CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Gambit OpenFoam compatibility Grid conversionquality (http://www.cfd-online.com/Forums/openfoam-pre-processing/62267-gambit-openfoam-compatibility-grid-conversionquality.html)

ghanshyam September 20, 2005 04:13

While importing the grid, gene
 
While importing the grid, generated by Gambit, OpenFoam detected one skewed face. I could see it using "parafoam" but to improve its quality "Tgrid' needs to be used. It looks like the definition of skewness is different in OpenFoam and in "Gambit/Tgrid". Consequently it was not possible to see the same "face" in Tgrid. How do I identify the face in Tgrid. "checkMesh" has given the face number, how I can make use of this? I tried to convert it into hexadecimal format but the face what Tgrid is displaying is not the same as the one what paraview shows. So how do I proceed?

Thanks and regards
GS


All times are GMT -4. The time now is 04:07.