Few simple questions concerning boundary conditions (pressure)

milos · March 20, 2009, 11:01

I'm new to OpenFOAM and I have a few fairly simple questions concerning boundary conditions. I am using 'simpleFoam' solver with RNGk-epsilon model.

1. - What is the default unit for pressure in OpenFOAM? In the small matrix it stands
[0 2 -2 0 0 0 0], which would basically mean [m^2/s^2]. What sort of pressure unit is that? I tried changing it to [kg/(m*s^2)] = [Pa], but then OpenFOAM doesn't run.

2. - I would like to measure pressure losses due a pipe elbow, but I'm not sure which boundary conditions to use for for pressure at the inlet and outlet. Currently I'm using 'zeroGradient' for inlet and 'fixedValue' (uniform 0) for the outlet. Any advice is welcome.

Thanx a million!

Milos

milos · March 21, 2009, 07:08

Ok, I found the answer to my first question, but I could still use some advice for the other one.

Thnx

Milos

March 20, 2009, 11:01	Few simple questions concerning boundary conditions (pressure)	#1
milos New Member Milos Stanic Join Date: Mar 2009 Location: Novi Sad, Serbia Posts: 29 Rep Power: 17	I'm new to OpenFOAM and I have a few fairly simple questions concerning boundary conditions. I am using 'simpleFoam' solver with RNGk-epsilon model. 1. - What is the default unit for pressure in OpenFOAM? In the small matrix it stands [0 2 -2 0 0 0 0], which would basically mean [m^2/s^2]. What sort of pressure unit is that? I tried changing it to [kg/(m*s^2)] = [Pa], but then OpenFOAM doesn't run. 2. - I would like to measure pressure losses due a pipe elbow, but I'm not sure which boundary conditions to use for for pressure at the inlet and outlet. Currently I'm using 'zeroGradient' for inlet and 'fixedValue' (uniform 0) for the outlet. Any advice is welcome. Thanx a million! Milos

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions about the inletOutlet and outletInlet boundary conditions	brooksmoses	OpenFOAM Running, Solving & CFD	24	March 2, 2021 01:16
Water vapour condensation in CFX-5.7.1	hdj	CFX	1	November 27, 2005 07:15
Boundary Conditions for High pressure Reservoir	Rajesh	FLUENT	0	November 10, 2005 01:48
Gas pressure question	Dan Moskal	Main CFD Forum	0	October 24, 2002 22:02
Pressure boundary conditions of channel flow	Ray	Main CFD Forum	4	July 29, 2002 09:08

March 21, 2009, 07:08		#2
milos New Member Milos Stanic Join Date: Mar 2009 Location: Novi Sad, Serbia Posts: 29 Rep Power: 17	Ok, I found the answer to my first question, but I could still use some advice for the other one. Thnx Milos