CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

BC type

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2009, 03:19
Default BC type
  #1
New Member
 
Kyian Barrat
Join Date: Apr 2009
Posts: 25
Rep Power: 8
Khelian973 is on a distinguished road
Hi foamers,

I have a stupid question but i dont know the answer. I have an interface between a solid and a fluid, considered as a wall.
What is the "type" to implement a simple wall, allowing the heat flux of temperature, in both side. "ZeroGradient" is for adiabatic wall i know. "fixedValue" doenst fit. I uses the type "calculated" but im not sure.

There are solidWallTemperatureCoupled or solidWallHeatFluxTemperatureCoupled but im not understand exactly for what case these both patches are necessary.

Thanks for helping me
SIncerely
Kyian
Khelian973 is offline   Reply With Quote

Old   July 10, 2009, 05:10
Default
  #2
Assistant Moderator
 
Bernhard Gschaider
Join Date: Mar 2009
Posts: 3,912
Rep Power: 40
gschaider will become famous soon enoughgschaider will become famous soon enough
Quote:
Originally Posted by Khelian973 View Post
I have a stupid question but i dont know the answer. I have an interface between a solid and a fluid, considered as a wall.
What is the "type" to implement a simple wall, allowing the heat flux of temperature, in both side. "ZeroGradient" is for adiabatic wall i know. "fixedValue" doenst fit. I uses the type "calculated" but im not sure.

There are solidWallTemperatureCoupled or solidWallHeatFluxTemperatureCoupled but im not understand exactly for what case these both patches are necessary.
The first question that comes to mind is: Which solver are you using? Any further discussion depends on this. And please be more specific in the title when you start a new thread. For instance "BC Type for Heat Flux". BTW: if you search for that phrase you will find some threads that might be of interest for you
gschaider is offline   Reply With Quote

Old   July 10, 2009, 05:49
Default
  #3
New Member
 
Kyian Barrat
Join Date: Apr 2009
Posts: 25
Rep Power: 8
Khelian973 is on a distinguished road
Hi Bernhard

Sorry dor the tittle , i will try to be more specific next time...

Im using the solver chtMultiRegion foam. I have a hot fluid in a pipeline and I want to study the impact of the heat transfer from fluid to the solid.

I've read some thread about BC for heat flux but it's usually to have a fixed heat flux. It's just a simple interface between a fluid and a solid allowing heat transfert
Khelian973 is offline   Reply With Quote

Old   July 10, 2009, 07:55
Default
  #4
Assistant Moderator
 
Bernhard Gschaider
Join Date: Mar 2009
Posts: 3,912
Rep Power: 40
gschaider will become famous soon enoughgschaider will become famous soon enough
Quote:
Originally Posted by Khelian973 View Post
Hi Bernhard

Sorry dor the tittle , i will try to be more specific next time...

Im using the solver chtMultiRegion foam. I have a hot fluid in a pipeline and I want to study the impact of the heat transfer from fluid to the solid.

I've read some thread about BC for heat flux but it's usually to have a fixed heat flux. It's just a simple interface between a fluid and a solid allowing heat transfert
I never worked with the cht-solver so I'm afraid I can't help you there. Sorry.
gschaider is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure instability with rhoSimpleFoam daniel_mills OpenFOAM Running, Solving & CFD 44 February 17, 2011 18:08
LiftDrag tool nuovodna OpenFOAM Running, Solving & CFD 45 September 2, 2009 17:56
reconstructParMesh not working with an axisymetric case francesco OpenFOAM Bugs 4 May 8, 2009 05:49
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 20:50
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 23:37.