CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   DecomposePar problems (http://www.cfd-online.com/Forums/openfoam-pre-processing/66634-decomposepar-problems.html)

feijooos July 20, 2009 14:35

DecomposePar problems
 
When I decompose a case I get this error message:

Processor 31
Number of cells = 41220
Number of faces shared with processor 30 = 2178
Number of faces shared with processor 25 = 2129
Number of processor patches = 2
Number of processor faces = 4307
Number of boundary faces = 2279

Number of processor faces = 93738
Max number of processor patches = 10
Max number of faces between processors = 9036
Detected additional non-decomposed files in "/home/eelco/OpenFOAM/###/run/##/##/grid_comparison/new/0.0023/uniform"

Processor 0: field transfer
Processor 1: field transfer
Processor 2: field transfer
Processor 3: field transfer
Processor 4: field transfer
Processor 5: field transfer

I checked out the 'time' file in this folder and it looks fine. Don't know what could be wrong here, any ideas?

Thanks,

Eelco

sega July 21, 2009 00:50

I got this message too. Its not critical.

I used the channelOodles solver, which is protocolling the number of timesteps used for averaging in the /uniform/time file.
This information doesn't need to be decomposed as its a processor independent information.

wolle1982 July 22, 2009 11:00

just delete the uniform folder

feijooos July 23, 2009 10:34

that's what I thought, thanks!


All times are GMT -4. The time now is 08:22.