CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Advise about solver choice (http://www.cfd-online.com/Forums/openfoam-pre-processing/73023-advise-about-solver-choice.html)

Malex February 24, 2010 13:01

Advise about solver choice
 
Hi, everyone

I would like to simulate the injection of heat gas into a cavity at ambient temperature. Moreover this cavity has one outlet. This flow features following :
-2D/3D flow
-Newtonian fluid
-Turbulent flow
-Ideal gas (heat and cool air)
-Transient flow
- Low Mach (<0.3) but we have to consider a variable density, because it varies with the temperature.
-The solver has to solve the energy equation

Could you tell me what is the solver the most appropriate to simulate this problem. I though about buoyantPisoFoam, but I am not sure. If everyone can confirm my choice or purpose me a better idea, it will be wonderful.
thx


All times are GMT -4. The time now is 06:45.