CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Advise about solver choice

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 24, 2010, 13:01
Default Advise about solver choice
  #1
New Member
 
Maxime COYEN
Join Date: Feb 2010
Posts: 1
Rep Power: 0
Malex is on a distinguished road
Hi, everyone

I would like to simulate the injection of heat gas into a cavity at ambient temperature. Moreover this cavity has one outlet. This flow features following :
-2D/3D flow
-Newtonian fluid
-Turbulent flow
-Ideal gas (heat and cool air)
-Transient flow
- Low Mach (<0.3) but we have to consider a variable density, because it varies with the temperature.
-The solver has to solve the energy equation

Could you tell me what is the solver the most appropriate to simulate this problem. I though about buoyantPisoFoam, but I am not sure. If everyone can confirm my choice or purpose me a better idea, it will be wonderful.
thx
Malex is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
why the solver reject it? Anyone with experience? bearcat CFX 6 April 28, 2008 14:08
solver choice nabeel mohsin FLUENT 2 September 25, 2003 07:13
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32
Setting a B.C using UserFortran in 4.3 tokai CFX 10 July 17, 2001 16:25


All times are GMT -4. The time now is 06:36.