CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Pre-Processing

timeVaryingUniformInletOutlet BC implementation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 12, 2010, 15:39
Default timeVaryingUniformInletOutlet BC implementation
New Member
Muhammad reza hassani
Join Date: Apr 2010
Posts: 29
Rep Power: 7
mhassani is on a distinguished road
Dear foamers
I want to specify a time varying velocity inlet as a boundary condition; As i have read about this type of BC in other threads, the timeVaryingUniformInletOutlet can be used. I have prepared a table of time Vs velocity in a .dat file. But when it comes to specify the boundary type in U file in /0 directory, I don't know about some entries:
type timeVaryingInletOutlet
fileName "inletVelocity.dat";
flowRate ...;
outOfBounds ...;
value ...;

//and in the .dat file :
(ti (Ux Uy Uz))

I don't know what flowRate, outOfBounds, and value I have to use?
In addition to this, Do I have to specify a "p" file as well as this U file in /0 directory which specify a zeroGradient condition for velocity at the outlet too? if yes, what type of boundary condition must be specified in this file for p at the inlet and outlet?

P.S. in order to clarify the last question, I must say that the domain is a 2D channel with a time varying uniform velocity at the inlet along with a zeroGradient Nuemann outlet BC for the outlet.
mhassani is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM141dev A new implementation of dynamicKistlerGammaContactAngle eberberovic OpenFOAM Running, Solving & CFD 15 August 20, 2015 11:24
Implementation of boundary conditions for FVM Tom Main CFD Forum 7 August 26, 2014 05:58
Please explain the implementation of species transport Eqn in reactingFoam kallipygian OpenFOAM Running, Solving & CFD 0 October 13, 2008 07:29
Implementation details of SST k-omega model Niels Main CFD Forum 3 July 3, 2008 17:45
FEM Implementation of pressure-correction scheme Markus Main CFD Forum 4 January 6, 2007 02:53

All times are GMT -4. The time now is 04:36.