CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (http://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Problem in defining porous region on an imported tetrahedral mesh (http://www.cfd-online.com/Forums/openfoam-pre-processing/88694-problem-defining-porous-region-imported-tetrahedral-mesh.html)

run_cfd May 24, 2011 03:15

Problem in defining porous region on an imported tetrahedral mesh
 
Hi,

Greetings!!!

I am trying to solve a problem which involves a compressible flow in porous media with heat transfer effects. My domain is completely filled with porous media i.e all the internal cells have a porosity of 0.6. I imported the mesh from starCD by "star4ToFoam", but the imported OF mesh didn't detected the porous region. Could any body tell me how to assign a porosity of 0.6 to all the internal cells of this imported OF mesh. I edited the files of tutorial 'angledductImplicit' of 'rhoPorousSimpleFoam'.

MLD


All times are GMT -4. The time now is 07:00.