CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Discretizer - Attaching BCs to surfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 6, 2011, 07:07
Default Discretizer - Attaching BCs to surfaces
  #1
New Member
 
Join Date: Nov 2011
Posts: 1
Rep Power: 0
Smurf is on a distinguished road
Hi,

I have generated an STL file (ASCII) for use in Discretizer. When read in to Discretizer I'm unable to select surfaces to attach BCs.

The part for modelling was created in SolidEdge and the operating system used is Windows 7 using the BlueCFD-1.7 installation.

Any help here would be greatly appreciated.

Smurf
Smurf is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to get forces on Iso-Clip Surfaces and How to get forces in cylindrical coordinat CFD XUE FLUENT 3 March 18, 2015 04:28
Dealing with BC's in OF 1.6 vkrastev OpenFOAM Running, Solving & CFD 5 September 4, 2012 11:58
Understanding Code behind BCs Linse OpenFOAM Programming & Development 8 January 9, 2012 09:58
Periodic BCs for flow through body centered cubic Luigi_ STAR-CCM+ 1 January 26, 2011 05:48
Faceted surfaces in ICEM Chriss Main CFD Forum 1 May 6, 2008 15:18


All times are GMT -4. The time now is 09:02.