CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Community Contributions

[swak4Foam] groovybc and heat flux on wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By gschaider

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 5, 2013, 09:39
Default groovybc and heat flux on wall
  #1
Senior Member
 
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14
m5m5kh is on a distinguished road
Hi foamers
I used groovyBC as boundary condition for wall of my case.but I have a problem.I modifed the heat flux on the wall but when temperature of the upper region of furnace is still 298K and the outer temperature is 298K too.so I expected to see zero gradient on the wall but there is a flux in paraFoam
it show me temprature at walls 0 while the lowest temperature is 298 in my boundary conditions.
I attached my case figure.
any help would be appreciated.

type groovyBc;
variables "h=1.12;k=0.065;Tinf=298;";
gradientExpression "h/k*(T-Tinf)";
fractionExprssion "0"; // 0 for neumann boundary condition
value uniform 298;

regards
Mohsen
Attached Images
File Type: jpg 458.jpg (39.2 KB, 47 views)
File Type: jpg 4581.jpg (18.1 KB, 38 views)

Last edited by m5m5kh; October 5, 2013 at 11:05.
m5m5kh is offline   Reply With Quote

Old   October 6, 2013, 01:46
Unhappy
  #2
Senior Member
 
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14
m5m5kh is on a distinguished road
no idea!!!!!!!!!!
m5m5kh is offline   Reply With Quote

Old   October 6, 2013, 11:16
Default
  #3
Assistant Moderator
 
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51
gschaider will become famous soon enoughgschaider will become famous soon enough
Quote:
Originally Posted by m5m5kh View Post
Hi foamers
I used groovyBC as boundary condition for wall of my case.but I have a problem.I modifed the heat flux on the wall but when temperature of the upper region of furnace is still 298K and the outer temperature is 298K too.so I expected to see zero gradient on the wall but there is a flux in paraFoam
it show me temprature at walls 0 while the lowest temperature is 298 in my boundary conditions.
I attached my case figure.
any help would be appreciated.

type groovyBc;
variables "h=1.12;k=0.065;Tinf=298;";
gradientExpression "h/k*(T-Tinf)";
fractionExprssion "0"; // 0 for neumann boundary condition
value uniform 298;

regards
Mohsen
a) you have a typo in fractionExpression
b) Paraview doesn't know anything about groovyBC so the values it displays on the boundary might be wrong
c) for finding problems always use the Cell-values in Paraview. The point values are something it interpolates from the real values and might as well be a problem of Paraview
mgg likes this.
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request
gschaider is offline   Reply With Quote

Old   October 6, 2013, 11:19
Default
  #4
Assistant Moderator
 
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51
gschaider will become famous soon enoughgschaider will become famous soon enough
Quote:
Originally Posted by m5m5kh View Post
no idea!!!!!!!!!!
I think it is a bit strange to expect an immediate answer

a) because this is a voluntary community service
b) it is a weekend
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request
gschaider is offline   Reply With Quote

Old   October 6, 2013, 12:30
Talking
  #5
Senior Member
 
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14
m5m5kh is on a distinguished road
Hi Bernhard
I'm sorry for ruining your weekend you are right
apologies

regards
Mohsen
m5m5kh is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] Fixed Wall Heat Flux with groovyBC flowpow OpenFOAM Community Contributions 0 September 7, 2016 10:48
[swak4Foam] Varying heat flux using groovyBC with chtMultiRegionSimpleFoam hcl734 OpenFOAM Community Contributions 5 December 15, 2015 09:55
[swak4Foam] groovybc and heat flux on wall m5m5kh OpenFOAM Community Contributions 3 October 3, 2013 15:19
[swak4Foam] Wall heat transfer using groovyBC (XiFoam solver) usergk OpenFOAM Community Contributions 7 February 4, 2011 14:36
groovyBC nonuniform Wall heat flux Shoonya Main CFD Forum 0 August 11, 2010 14:03


All times are GMT -4. The time now is 07:06.