|July 19, 2012, 04:35||
Compact Thermal Model
Join Date: Jul 2012
Posts: 33Rep Power: 4
I actually work around the compact thermal model (CTM) and the potential solver which could manage these model. The aim of this modelisation is to manage the thermal statement of an electronic card, with some electronics components. Indeed, with CTM modelisation, we have to use hollow block to represent the components, with a thermal network in this box. Around the components, there is a fluid, for exemple, the air.
So, i know that OpenFOAM could solve heat transfer between a solid region and fluid region, with chtMultiRegionFOAM. i know that we have to add radation's equation. So, it's ok.
1. But, i don't know if OpenFOAM could accept shell (Face 2D) on a 3D modelisation.
2. Could OpenFoam manage this kind of mesh ? : Maillage
That's my questions .
I'm sure i'm not very clear, but if you have questions about mines....You can ask !
Excuse my english
Best Regards, M_f
Information about CTM : Compact Thermal Model
Last edited by m_f; July 19, 2012 at 10:59.
|Thread||Thread Starter||Forum||Replies||Last Post|
|about Subgrid-scale model||impecca||OpenFOAM Running, Solving & CFD||4||December 20, 2013 11:36|
|Wrong calculation of nut in the kOmegaSST turbulence model||FelixL||OpenFOAM Bugs||27||March 27, 2012 09:02|
|IAPWS water properties + orthotropic thermal conductivity||Chander||CFX||1||February 29, 2012 18:26|
|diff bet total energy model and thermal energy model??||vijeshjoshi23||Main CFD Forum||0||October 8, 2009 02:29|
|DPM model w/ Wave model - errors in documentation||HS||FLUENT||0||April 12, 2006 04:37|