CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

GGI for volumes / mesh mapping?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 28, 2012, 05:21
Default GGI for volumes / mesh mapping?
  #1
New Member
 
Manuele Aufiero
Join Date: Dec 2011
Location: Grenoble
Posts: 8
Rep Power: 5
orca.blu is on a distinguished road
Dear all,

I would like to solve some equations (CFD) on a mesh and other (neutron diffusion) on a different mesh.

The two meshes share the same physical space but are differently optimized.

Is there a way to pass the variables (e.g., T, q''', ecc. ) between the two non-conforming mesh?
i.e., to calculate the weighting factors from a generic cell on the mesh A to a generic cell on the mesh B, like GGI does for patches.

Matrix-level coupling between two equations living on different meshes would be great but is not strictly required since most of the strongly coupled equation would share the same mesh .

Can you suggest any presentation/paper/web-page/tutorial?

Thank you very much!
__________________
Manuele Aufiero
orca.blu is offline   Reply With Quote

Old   September 28, 2012, 08:53
Default
  #2
Senior Member
 
Sandeep Menon
Join Date: Mar 2009
Location: Amherst, MA
Posts: 386
Rep Power: 15
deepsterblue will become famous soon enough
I did something very similar for volume fields. Take a look at my implementation:

https://github.com/smenon/dynamicTop...ervativeFields

You can get the methodology / citation here:
http://www.sciencedirect.com/science...45782511001666
__________________
Sandeep Menon
University of Massachusetts Amherst
https://github.com/smenon
deepsterblue is offline   Reply With Quote

Old   September 28, 2012, 10:02
Default
  #3
New Member
 
Manuele Aufiero
Join Date: Dec 2011
Location: Grenoble
Posts: 8
Rep Power: 5
orca.blu is on a distinguished road
Thank you!

Good job, your work is quite wider than my needs

I was only looking for something very simple, similar to mapField to be performed at each time step.

I'll read your paper and I'll try to learn something new!

Thanks

Manuele
__________________
Manuele Aufiero
orca.blu is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SNappyHexMEsh and GGI (standing mesh gets deleted) A.Wendy OpenFOAM Native Meshers: snappyHexMesh and Others 1 August 2, 2013 07:04
Mapping deltaTChem_ on refined mesh tgvosk OpenFOAM Running, Solving & CFD 0 August 29, 2012 11:32
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Turbogrid-icem mesh ggi Kumar CFX 1 May 18, 2007 04:19


All times are GMT -4. The time now is 18:33.