CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Programming & Development (http://www.cfd-online.com/Forums/openfoam-programming-development/)
-   -   icoFoam with multiRegion and passive scalar transport (http://www.cfd-online.com/Forums/openfoam-programming-development/110779-icofoam-multiregion-passive-scalar-transport.html)

RugbyGandalf December 20, 2012 11:44

icoFoam with multiRegion and passive scalar transport
 
1 Attachment(s)
Dear FoamCommunity,

i try to build a solver, which allows me to simulate multiRegions with passive scalartransport from fluid to solid and back, for a nonNewtonian fluid.

I took pieces from chtMultiRegionFoam.C and nonNewtonianIcoFoam.C as well as some from scalarTransportFoam.
At the moment i am facing several problems. The actual one: i cannot compile the solver without any warnings/errors.
For instance: i can't figure out, why "fluid" is not defined, respectively where to define it.

I will upload the code of the .C file and the error-message from terminal as well.
Hopefully someone can help me.

Regards,

Martin

Code:

SOURCE=CDTnonNewtonianIcoFoam.C ;  g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3  -DNoRepository -ftemplate-depth-100 -Ifluid -Isolid -Iinclude -I/opt/openfoam211/src/meshTools/lnInclude -I/opt/openfoam211/src/finiteVolume/lnInclude -I/opt/openfoam211/src/transportModels -I/opt/openfoam211/src/transportModels/incompressible/singlePhaseTransportModel -I/opt/openfoam211/src/thermophysicalModels/basic/lnInclude -I/opt/openfoam211/src/thermophysicalModels/specie/lnInclude -I/opt/openfoam211/src/thermophysicalModels/basicSolidThermo/lnInclude -I/opt/openfoam211/src/turbulenceModels/compressible/turbulenceModel/lnInclude  -IlnInclude -I. -I/opt/openfoam211/src/OpenFOAM/lnInclude -I/opt/openfoam211/src/OSspecific/POSIX/lnInclude  -fPIC -c $SOURCE -o Make/linux64GccDPOpt/CDTnonNewtonianIcoFoam.o
CDTnonNewtonianIcoFoam.C: In function ‘int main(int, char**)’:
CDTnonNewtonianIcoFoam.C:93: error: ‘fluid’ was not declared in this scope
CDTnonNewtonianIcoFoam.C:118: error: ‘pRefCell’ was not declared in this scope
CDTnonNewtonianIcoFoam.C:118: error: ‘pRefValue’ was not declared in this scope
In file included from CDTnonNewtonianIcoFoam.C:127:
/opt/openfoam211/src/finiteVolume/lnInclude/continuityErrs.H:40: error: no match for ‘operator+=’ in ‘cumulativeContErr += globalContErr’
CDTnonNewtonianIcoFoam.C:136: error: no matching function for call to ‘laplacian(const int&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>&)’
In file included from CDTnonNewtonianIcoFoam.C:149:
solid/lookupSolidDiffCoeff.H:2: error: ‘diffCoeffSolid’ was not declared in this scope
solid/lookupSolidDiffCoeff.H:11: error: ‘subDict’ was not declared in this scope
CDTnonNewtonianIcoFoam.C:154: error: ‘diffCoeff’ was not declared in this scope
solid/readSolidMultiRegionPIMPLEControls.H:3: warning: unused variable ‘nNonOrthCorr’
CDTnonNewtonianIcoFoam.C:76: warning: unused variable ‘finalIter’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:32: warning: unused variable ‘adjustTimeStep’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:35: warning: unused variable ‘maxCo’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:38: warning: unused variable ‘maxDeltaT’
solid/readSolidTimeControls.H:32: warning: unused variable ‘maxDi’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:32: warning: unused variable ‘adjustTimeStep’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:35: warning: unused variable ‘maxCo’
/opt/openfoam211/src/finiteVolume/lnInclude/readTimeControls.H:38: warning: unused variable ‘maxDeltaT’
solid/readSolidTimeControls.H:32: warning: unused variable ‘maxDi’
make: *** [Make/linux64GccDPOpt/CDTnonNewtonianIcoFoam.o] Fehler 1


Ivooo January 2, 2013 03:41

Hi,

Did you check the topic about chtIcoMultiRegionFoam? It can be found here [1], you might need to adjust it somewhat to fit your needs, but the basic framework is already there, it seems.

[1] http://www.cfd-online.com/Forums/ope...egionfoam.html


All times are GMT -4. The time now is 07:16.