CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Programming & Development (http://www.cfd-online.com/Forums/openfoam-programming-development/)
-   -   New Boundary condition (http://www.cfd-online.com/Forums/openfoam-programming-development/115200-new-boundary-condition.html)

sihaqqi March 26, 2013 01:42

New Boundary condition
 
Hi

In openfoam, I am trying to make new boundary condition; from parabolic to powerLaw for turbulent flow. While doing this, when I input $wmake libso customJetPatchField
it gives me the following error: no rules to make target “ customJetPatchField.dep” needed by Make linux 64 GCcDP0pt/dependecies”. Stop

Secondly, when I type in simpleFoam to run, it says patchFields not available. Instead it gives me a list of patchfields from Make/files file in openfoam211 folder. Also it does not recognize my powerLawVelocity. Despite the fact that I have followed the tutorial at the link http://openfoamwiki.net/index.php/Si...ry_/_Tutorials. I have modified controlDict file as well.

Can anyone please advise how I can resolve these issues as this is my first experience with OpenFoam and I have only freshly started doing my MS in CFD.

I shall be very grateful.

Regards

sihaqqi March 26, 2013 23:25

problem solved


All times are GMT -4. The time now is 15:50.