CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Programming & Development (http://www.cfd-online.com/Forums/openfoam-programming-development/)
-   -   Identify cells with a specific path (http://www.cfd-online.com/Forums/openfoam-programming-development/115993-identify-cells-specific-path.html)

Giancarlo_IngChimico April 10, 2013 14:56

Identify cells with a specific path
 
Hi FOAMers,
I am working with a multiRegion mesh. I have to copy the value of internal Field of cells located at the interface between the two regions in a new vector. This cells have a specific path that for the fluid region is named "fluid_to_solid" and for the solid one is named "solid_to_fluid". I would like to know as I can identify this cells in OpenFoam?

Best regards

Giancarlo

wyldckat April 14, 2013 13:17

Greetings Giancarlo,

Just to confirm: is this problem related to the one you solved in the thread http://www.cfd-online.com/Forums/ope...fic-patch.html ?

Best regards,
Bruno

Giancarlo_IngChimico April 14, 2013 17:00

Yes, I have added two posts by mistake.
Sorry

Kind regards

Giancarlo


All times are GMT -4. The time now is 02:02.