CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

pisoFoam LES turbulent model + temperature

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 4, 2013, 06:55
Default pisoFoam LES turbulent model + temperature
  #1
New Member
 
Konrad
Join Date: Sep 2013
Posts: 4
Rep Power: 3
Byxon is on a distinguished road
Hello guys,
at the begining few words about the case, It is tube with steady coolant flow ( water ) with concentrical cylinder inside the tube which let the coolant flow but interfere it. I have managed to solve the problem with LES model in pisoFOAM as a case without heat source. Now I would like to add a temperature on the cylinder wall ( as a uniform heat source ). I have tried the popular solution for the icoFoam and also I have tried to use some sollutions posted in other threads but I cant even recompile solver or start iterations while using it. I dont wanna specify errors for now, what I wanted to ask is if some1 could let me see working pisoFoam solver with temperature pool, i mean modyfied pisoFoam.C , createFields.H ,TEqn.H, variables from 0. folder , files from constant folder except polyMesh ofc, fvSchemes and fvSoultion. What would be the case problem doesn't rlly matter I just want to compare working files to mine and workout sth on myself. ( different than the Matt_B 's thread which I found )
Best Regards
Byxon is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Implement an les turbulence model pante OpenFOAM Programming & Development 19 December 5, 2014 17:16
Incomp. LES in pisoFOAM, how to set up Smagorinsky model with van Driest dampin Jan.Ísth OpenFOAM Running, Solving & CFD 18 September 17, 2014 06:18
Implementation of wall model to LES saeedi Main CFD Forum 3 August 24, 2012 14:51
Too low temperature at combustor outlet romekr FLUENT 2 February 6, 2012 11:02
k-omega-SST model (OF 1.6) - turbulent flat plate cboss OpenFOAM Running, Solving & CFD 23 November 13, 2011 02:28


All times are GMT -4. The time now is 10:02.