CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

accessing reference pressure set by solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 16, 2014, 05:48
Default accessing reference pressure set by solver
  #1
Senior Member
 
romant's Avatar
 
Roman Thiele
Join Date: Aug 2009
Location: Stockholm, Sweden
Posts: 352
Rep Power: 10
romant is on a distinguished road
In the case of compressible solvers, if the boundary conditions do not set a pressure, a reference pressure is set in the solution dictionary fvSolution. However, I can imagine that if the boundary conditions are set that a similar pressure is set and stored somewhere.

Therefore:

Is there a way to retrieve the reference pressure that is set by solvers?
__________________
~roman
romant is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
parallel code samiam1000 SU2 3 March 25, 2013 05:55
how to set reference pressure in tran. analysis xiaoyue1990 CFX 10 May 22, 2012 07:38
error message cuteapathy CFX 14 March 20, 2012 07:45
why the solver reject it? Anyone with experience? bearcat CFX 6 April 28, 2008 14:08
Building OpenFoAm on SGI Altix 64bits anne OpenFOAM Installation 8 June 15, 2006 09:27


All times are GMT -4. The time now is 21:06.