CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

Source term only in a mesh zone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 6, 2014, 13:08
Default Source term only in a mesh zone
  #1
New Member
 
rama13's Avatar
 
Damiano Natali
Join Date: Mar 2013
Location: Genova, Italy
Posts: 15
Rep Power: 4
rama13 is on a distinguished road
Hi Foamers,

I know that with fvOptions I can create an explicit source term for my equations in a pre-defined part of the mesh.

However, I am editing the icoFoam solver for taking into account a source term implicitly (fvm::Sp()) and so far everything works ok.

Now I am wondering how to tell the solver to take into account this source term just in some zone of the mesh (exactly as it does with fvOption with cellZone).

I think this should be done with "meshTools"...could anyone please give me some hints?

Thanks in advance,
Damiano
rama13 is offline   Reply With Quote

Reply

Tags
mesh zone, source term

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
[GAMBIT] periodic faces not matching Aadhavan ANSYS Meshing & Geometry 6 August 31, 2013 11:25
Mesh conversion problem (fluent3DMeshToFoam) Aadhavan OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 1 December 12, 2012 11:38
[ICEM] Export ICEM mesh to Gambit / Fluent romekr ANSYS Meshing & Geometry 1 November 26, 2011 13:11
Sliding mesh error Karl Kevala FLUENT 4 February 21, 2001 16:52


All times are GMT -4. The time now is 01:21.