|
[Sponsors] |
[PyFoam] what does this message mean?"Duration of pickling 0.0856988430023 too long..." |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 3, 2013, 09:36 |
what does this message mean?"Duration of pickling 0.0856988430023 too long..."
|
#1 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
the run takes too long time and this message is displayed:
Code:
regIOobject::readIfModified() : Re-reading object fvSolution from file "/home/ehsan/Desktop/shock_tube_and_backwards/shock_tube_650000_p/processor0/../system/fvSolution" Mean and max Courant Numbers = 0.0410868479 0.09708383921 deltaT = 1.58982006e-08 Time = 9.38026e-08 Duration of pickling 0.0856988430023 too long. Extending frequency from 1.0 to 4.28494215012
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by immortality; May 3, 2013 at 10:51. |
|
May 3, 2013, 10:18 |
|
#2 |
Senior Member
Niels Gjoel Jacobsen
Join Date: Mar 2009
Location: Copenhagen, Denmark
Posts: 1,900
Rep Power: 37 |
Hi Ehsan,
You need to provide some additional information, such as OF-version, solver (customised by yourself?), etc. I have tried searching the application and source code folders in versions OF2.1.0, OF2.2.0 and OF1.6-ext, and in none of them the word "pickling" is to be found. This makes it very hard to tell anything on the source of the error. Kind regards Niels |
|
May 4, 2013, 18:34 |
|
#3 | |
Assistant Moderator
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51 |
Quote:
Only a warning not a problem. So no need to do anything about it
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request |
||
May 5, 2013, 05:07 |
|
#4 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
thank you Niels for your consideration and thank you Bernhard for the answer.
could you give me any more information just to know.why writing may takes too long?is it related to results of run? thanks.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 5, 2013, 17:18 |
|
#5 | |
Assistant Moderator
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51 |
Quote:
If it bothers you: switch it off with or increase the frequency. The options are there and you already know about --help
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request |
||
September 17, 2013, 08:18 |
|
#6 |
New Member
Join Date: Aug 2013
Posts: 20
Rep Power: 12 |
hi,
I have kind of the same problem with pyFoamPlotWatcher. It starts running but after a while it extends frequency: Duration of pickling 0.0379099845886 too long. Extending frequency from 1.0 to 1.89549922943 so it gives me what follows: #0 Foam::error:rintStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so" #1 Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so" #2 in "/lib/x86_64-linux-gnu/libc.so.6" #3 Foam::LimitedScheme<double, Foam::limitedLinearLimiter<Foam::NVDTVD>, Foam::limitFuncs::magSqr>::limiter(Foam::Geometric Field<double, Foam::fvPatchField, Foam::volMesh> const&) const in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libfiniteVolume.so" #4 Foam::limitedSurfaceInterpolationScheme<double>::w eights(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) const in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libfiniteVolume.so" #5 Foam::fv::gaussConvectionScheme<double>::fvmDiv(Fo am::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) const in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libfiniteVolume.so" #6 Foam::tmp<Foam::fvMatrix<double> > Foam::fvm::div<double>(Foam::GeometricField<double , Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so" #7 Foam::tmp<Foam::fvMatrix<double> > Foam::fvm::div<double>(Foam::GeometricField<double , Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so" #8 Foam::incompressible::RASModels::kEpsilon::correct () in "/opt/OpenFOAM/OpenFOAM-2.1.x/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so" #9 in "/home/fsauser/OpenFOAM/fsauser-2.1.x/platforms/linux64GccDPOpt/bin/simplePipeFoam" #10 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #11 in "/home/fsauser/OpenFOAM/fsauser-2.1.x/platforms/linux64GccDPOpt/bin/simplePipeFoam" I use OF 2.1.x and a edited form of simpleFoam solver (including gradP term in UEqn). can anyone help me understanding? thanks in advance |
|
September 17, 2013, 08:31 |
|
#7 | |
Assistant Moderator
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51 |
Quote:
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request |
||
September 17, 2013, 08:52 |
|
#8 |
New Member
Join Date: Aug 2013
Posts: 20
Rep Power: 12 |
ok, I was just starting believing it is a matter of solver.
thanks |
|
September 17, 2013, 12:03 |
|
#9 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
it was because of bad BC's,so that the speed of flow was too slow according to groovyBC BC's.that time I corrected the BC's and all became fine again.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
December 29, 2014, 17:20 |
|
#10 |
New Member
Ali Heidari
Join Date: May 2013
Location: Tehran,Iran
Posts: 6
Rep Power: 12 |
hi Bernhard
how switch it off or increase the frequency?? |
|
December 30, 2014, 05:59 |
|
#12 |
New Member
Ali Heidari
Join Date: May 2013
Location: Tehran,Iran
Posts: 6
Rep Power: 12 |
Hi Bruno,
Thank you for answer. I use utilityRunner from PyFoam.Execution to run patchAverage (utility of openFoam). but this error is occurred. and no output exist in pInlet file. what does it mean?and how to resolve? Best regard. error Code:
Duration of pickling 2.50788116455 too long. Extending frequency from 60.0 to 125.394058228 End Run Getting LinuxMem: [Errno 2] No such file or directory: '/proc/5750/status' Unused output: Reading volScalarField p Unused output: Average of volScalarField over patch inlet[0] = 94845.7 Unused output: Unused output: End Unused output: Duration of pickling 2.13459920883 too long. Extending frequency from 60.0 to 106.729960442 Code:
from PyFoam.Execution.UtilityRunner import UtilityRunner eUtil=UtilityRunner(argv=["patchAverage p inlet -latestTime","-case",case],silent = True,logname = "pInlet") eUtil.start() |
|
December 31, 2014, 12:27 |
|
#13 |
New Member
Ali Heidari
Join Date: May 2013
Location: Tehran,Iran
Posts: 6
Rep Power: 12 |
hi Bruno
which option of pyFoamPlotWatcher switch it off or increase the frequency?? |
|
January 7, 2015, 15:38 |
|
#14 |
Assistant Moderator
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51 |
He answered that above. Use --help and look for "frequency"
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ERROR: unable to find library | HJH | CFX | 6 | February 26, 2019 06:52 |
single directional message transmit in parallel model | su_junwei | OpenFOAM Programming & Development | 1 | December 17, 2009 07:00 |
Problems in compiling paraview in Suse 10.3 platform | chiven | OpenFOAM Installation | 3 | December 1, 2009 07:21 |
Error message in CFX-10 | CFDworker | CFX | 2 | October 12, 2007 07:23 |
How long should the message index be? | Jonas Larsson / Forum Admin | Main CFD Forum | 4 | August 26, 1998 15:10 |