CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

introducing vapour quality

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 16, 2015, 04:53
Unhappy introducing vapour quality
  #1
New Member
 
JISHNU H
Join Date: Nov 2014
Location: Kerala, India
Posts: 20
Rep Power: 3
jishnuhari25 is on a distinguished road
hi foamers,
i am planning to do saturated flow boiing simulation by openfoam. the base solver i selected is twophaseeulerfoam. i have selected a correlation for heta transfer coeffecient. but in that correlation vapour qualitry term is present. But i have no idea how i could introduce vapour quality term in the solver. Please help.
thanks in advance
jishnuhari25 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] PistonVale tutorial - issues about mesh quality Andrea1984 ANSYS Meshing & Geometry 5 October 11, 2013 09:30
[ICEM] improving mesh quality kannstmasehn ANSYS Meshing & Geometry 8 April 29, 2013 05:28
[ICEM] The pre-mesh quality is very good but the mesh quality is bad lnk ANSYS Meshing & Geometry 5 July 30, 2012 14:11
[ICEM] Hex refinement negative quality afterwards Anorky ANSYS Meshing & Geometry 8 March 22, 2010 04:25
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15


All times are GMT -4. The time now is 16:40.