 |
 |
 |
|
|
|
[Sponsors] | ||||
Problem with Temperature and volume fraction diffusion in Lee phase Change Model |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 21, 2015, 13:25
|
Problem with Temperature and volume fraction diffusion in Lee phase Change Model
|
#1 |
|
Senior Member
Hesam
Join Date: Feb 2015
Posts: 139
Rep Power: 11  |
Hi friends,
I try to implement Lee mass transfer model for boiling in OpenFoam. I use of implicit source term Sp = -vDotAlphal and explicite one Su = divU*alpha1. I use stefan problem for validation but in my case Temperature and volume fraction (alpha1) diffusion is very low in 100 sec. I don't know what is this problem reason. I attached case and solver and some images. Please Help me  alpha http://s3.picofile.com/file/8218463576/alpha.png T http://s3.picofile.com/file/8218463684/T.png Last edited by rapierrz; October 22, 2015 at 10:48. |
|
|
|
|
|
October 22, 2015, 04:22
|
|
#2 |
|
Senior Member
Hesam
Join Date: Feb 2015
Posts: 139
Rep Power: 11 |
Nobody doesn't have Lee mass transfer solver ???
|
|
|
|
|
|
|
October 22, 2015, 10:49
|
|
#3 |
|
Senior Member
Hesam
Join Date: Feb 2015
Posts: 139
Rep Power: 11 |
I solve it
|
|
|
|
|
|
|
June 6, 2020, 06:49
|
|
#4 | |
|
New Member
wanghongjie
Join Date: Apr 2020
Posts: 28
Rep Power: 6 |
Quote:
|
||
|
|
|
||
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
| Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
| Error in Two phase (condensation) modeling | adilsyyed | CFX | 15 | June 24, 2015 19:42 |
| Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
| Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Linear Mode
