 |
 |
 |
|
|
|
[Sponsors] | ||||
Assigning a variable value to each cell in mesh... |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 25, 2015, 04:35
|
Assigning a variable value to each cell in mesh...
|
#1 |
|
Member
AJAY BHANDARI
Join Date: Jul 2015
Location: INDIA
Posts: 57
Rep Power: 10  |
Hi all,
I am new to openFoam. I have been working in porousSimpleFoam. I have developed a porous media model basically a rectangular mesh with approx 15000 mesh elements. Using SetFields i assigned zones in it having different properties. Now i have two variables defined as permeability and porosity whose value i want to assign to each element in the mesh. Can anybody tell me how to do this where to make changes and how??? Any help will be appreciated. Any more information required about this plz let me know... Regards Ajay bhandari.. |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
| [snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
| emag beta feature: charge density | charlotte | CFX | 4 | March 22, 2011 09:14 |
| Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 21:58 |
Linear Mode
